We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Ski Bindings DIN Chart: How to Read It and Set Your Release Value

Use the ski bindings DIN chart to find the right release setting for your weight, height, boot sole and skiing level. A clear, step-by-step guide.

Updated November 2026

A ski bindings DIN chart tells you the release value your bindings should be set to, based on your body weight, height, age, boot sole length and skiing style. Follow the chart carefully and you will have a setting that lets the binding release in a fall before your legs or knees take the strain. This guide walks you through reading the chart, applying the right modifiers and checking your work.

What the DIN Chart Actually Measures

DIN stands for Deutsches Institut für Normung, the German standards body whose tables are the basis for binding release settings worldwide. The number on your binding is a release value, not a measure of how strong the binding is. A higher number means the binding holds on until more force is applied. Most manufacturers publish their own version of the DIN chart in the owner’s manual, and those tables are what you should use.

Shopping for one? See our guide: Ski Bindings Weight Chart vs Spec Sheets: Which Should You Choose?.

Step-by-Step: Finding Your Setting

  1. Write down your body weight in kilograms. If you know it in pounds, divide by 2.2.
  2. Measure your boot sole length (BSL) in millimeters. Heel-to-toe measurement on the sole is standard.
  3. Note your height, age and skiing ability level (beginner, intermediate or advanced).
  4. Find the row that matches your weight and boot sole length on the manufacturer’s chart.
  5. Apply the height, age and ability modifiers the chart lists. Lower ability, older age and shorter height usually move you toward a lower setting.
  6. Set the heel and toe piece to the resulting value, then check it with the binding’s built-in scale.

Factors That Change Your Number

The chart is a starting point. Skiers who are heavier than the table’s typical range, or who ski aggressively in deep snow and terrain parks, sometimes need a slightly higher value. Skiers who are less experienced, older or prone to knee injuries usually need a lower value. Boot sole length matters because it determines where the toe and heel pieces engage. A boot that does not match the binding’s BSL range will not release consistently, no matter what the dial says.

Factor Typical effect on setting
Lower skiing ability Set lower
Higher age (roughly 50 and over) Set lower
Aggressive, high-speed skiing Consider a higher setting within limits
Boot sole length mismatch Correct the BSL before adjusting the dial

Checks Before You Ski

Once your bindings are set, test them. Step into the binding, then have a helper check that the toe and heel pieces engage firmly and that the boot does not lift out easily. Do the same test after any boot change or after the binding has been serviced. Re-check your settings at the start of each season, because heavy use and temperature changes can shift the calibration. For more on what the number means, see Din Rating Ski Bindings: What the Number Means and How to Set It. For a deeper look, How to Set Ski Bindings to Boots: A Step-by-Step Guide for Ski Trips covers this in detail.

Common Mistakes

  • Using a chart from a different manufacturer. Each brand’s table is built for its own release mechanism.
  • Guessing your boot sole length instead of measuring it.
  • Setting the value as high as possible to prevent falls. This raises injury risk.
  • Ignoring a worn or damaged binding, which may not release correctly regardless of the setting.
  • Forgetting to re-check settings after changing boots or skis.

A boot sole gauge helps you measure BSL accurately before you look up your setting. View on Amazon

A ski binding screwdriver or multi-tool with the correct bits lets you adjust and check the DIN scale without stripping screws. View on Amazon

A bench-style binding tester can confirm that the release is working as the setting suggests, especially after service. View on Amazon

FAQ

Can I use the DIN chart for any ski binding?

Use the chart published by your binding’s manufacturer. Tables differ between brands, so a chart from another company may give a wrong value.

What if my number falls between two settings?

Choose the lower value if you are a beginner or intermediate skier, and consider the higher one only if you ski fast and aggressively. When unsure, ask a certified shop technician to check your setting.

How often should I check my DIN setting?

Check it at the start of every season and after any change to your boots, skis or body weight. Consult a qualified ski shop or binding technician for a full inspection if anything seems off.

Conclusion

A ski bindings DIN chart gives you a reliable starting point for release settings when you use the manufacturer’s table and measure your boot sole length accurately. Apply the modifiers for ability, age and height, then test your bindings before you ski. Revisit the setting each season so your bindings keep releasing when they should.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our skiing gear & technique guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Improve Your Skiing.