We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Salomon at Ski Boots: How to Fit and Adjust Them (Step-by-Step)

Learn how to fit, adjust and care for salomon at ski boots, from shell sizing to buckle tuning, so your skis respond the way they should.

Updated November 2026

Salomon at ski boots are alpine touring boots built to let you walk uphill and ski downhill in one pair. Getting them to fit properly is the main job, because a boot that is too loose or too tight will undo the benefits of the touring design. This guide walks through measuring, sizing and adjusting salomon at ski boots so you can make confident changes at home.

Step 1: Measure Your Foot and Pick the Right Shell Size

Start by measuring the length of your foot in centimeters while standing, with a heavy sock on. Boot shell sizes are usually based on mondopoint, which is that length in centimeters, so a foot that measures 27.0 cm points you toward a 27.0 shell. Compare that number against the manufacturer’s size chart, since salomon at ski boots can vary in internal length from model to model.

Shopping for one? See our guide: Top 5 Portable Ski Boot Dryer Picks for Fast, Safe Drying.

Next, check your forefoot width. Many touring models are built on a narrower last than resort boots, so if your foot is wide, look for a model with a roomier forefoot rather than simply sizing up, which will leave your heel floating.

Step 2: Set the Liner and Check Heel Hold

Put on the liner, then slide your foot into the shell with the liner fully seated and the cuff unbuckled. Your heel should sit firmly against the back of the shell. If it lifts more than a few millimeters when you flex forward, the heel pocket is too large for your foot, and that movement will show up as sloppy turns and blisters.

Once your foot is in, buckle the lower buckles first and keep the cuff loose. Then flex forward to simulate a skiing stance, and check that your toes just touch the front of the shell without curling.

Step 3: Tune the Cuff and Walk Mode

Salomon at ski boots usually offer a walk mode that releases the cuff so you can climb. Test both modes at home. In ski mode, the cuff should hold your shin firmly without pinching. In walk mode, you should be able to flex through a comfortable stride without the liner bunching at the ankle.

  1. Buckle in ski mode and stand in a relaxed athletic stance for two minutes.
  2. Flex forward slowly, watching for your heel lifting or your shin pressing hard on the top of the cuff.
  3. Switch to walk mode and take ten steps, checking for rubbing at the ankle or calf.
  4. Adjust the forward lean or cuff tension in small increments, then retest.

Step 4: Dial In the Flex and Forward Lean

Forward lean affects how your weight sits over the ski. Many salomon at ski boots offer adjustable forward lean, and a small change can noticeably alter balance. If you find yourself sitting back on the tails, try increasing the lean one notch. If you feel pushed onto your toes, reduce it.

Common Mistakes

  • Buying a shell that is too large because you plan to wear thick socks. Extra room lets your foot slide and causes heel lift.
  • Buckling the cuff tight before the liner is seated, which locks in pressure points.
  • Ignoring walk mode fit. A boot that skis well but feels miserable on the approach will leave you tired on long tours.
  • Skipping a fit check after the liner has packed out. Liners often compress over the first several days of use.
  • Heavy ski socks: A thin, fitted sock keeps the liner snug and reduces slip inside the shell. View on Amazon
  • Boot dryer: Drying liners fully after each day prevents the material from losing its shape. View on Amazon

For more on keeping boots dry and ready, see Ski Boot Dryer Systems (2026): Which Should You Choose? and Portable vs Wall-Mounted Travel Ski Boot Dryer: Which Is Better? (2026).

FAQ

How do I know if salomon at ski boots are too big?

If your heel lifts more than slightly when you flex forward, or your foot slides forward on steep downhill runs, the shell is probably too large. A correct fit should feel snug through the heel with your toes lightly touching the front.

Can I adjust salomon at ski boots myself?

Basic adjustments like buckle tension, cuff alignment and forward lean are designed for home use. Shell modifications such as grinding or heat molding should be done by a qualified boot fitter.

How often should I check the fit?

Check fit at the start of each season and again after your first few days of use, because liners compress. If you feel new pressure points or heel lift, retune the cuff before skiing again.

Conclusion

Fitting salomon at ski boots comes down to measuring correctly, locking the heel, and tuning the cuff and lean for both ski and walk mode. Work through the steps in order and retest after each change. A boot that fits well will feel like an extension of your legs on both the climb and the descent.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our skiing gear & technique guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Improve Your Skiing.